American Water Sports is pleased to offer this pre-owned 2021 MasterCraft XT22 — a modern, current-generation MasterCraft V-drive surf/wake boat in striking White with Viper Red exterior accents, configured with a 6.0L V8 inboard engine and Coolfeel Cloud Gray interior upholstery. Available at our Shell Knob location on Table Rock Lake (Stock #U-KC-2JCC7, Hull #MBC2JCC7H021), this XT22 represents the right-size, right-spec, right-vintage entry point into modern MasterCraft XT-class ownership — only four model years old, on the same modern XT platform that MasterCraft still produces today, and at a meaningful pre-owned savings vs. a comparable current-model XT22 build. Where the brokered 2000s-vintage MasterCraft X2 platforms in our pre-owned inventory predate modern wake-shaping and dash electronics, this 2021 XT22 is firmly in the current-platform era — SurfStar wake-shaping, modern XT Dash helm electronics, and full surf-capable factory ballast and plumbing. For the buyer who wants near-current-vintage MasterCraft V-drive ownership with the brand cachet, the modern surf wave, and meaningful price savings vs. a 2026 build, this 2021 XT22 is one of the cleanest pre-owned XT-class MasterCrafts in our inventory this season.
The XT22 sits at the more-accessible end of MasterCraft's modern XT V-drive surf/wake lineup — smaller than the XT23 and XT24, larger than the entry-level NXT22, and tuned for buyers who want serious surfing and wakeboarding capability in a tight, easy-handling 22-foot footprint. The XT platform delivers the full surf-capable feature set: SurfStar wake-shaping with side-to-side switching, factory ballast with plumbed bags, the modern XT Dash helm-electronics suite, MasterCraft's premium SoundStage audio by Meridian, and the kind of cockpit refinement and fit-and-finish that puts MasterCraft at the top of the inboard ski/wake industry. By 2021, the XT platform was well into its current-architecture production cycle — meaning a four-year-old XT22 today shares the vast majority of its hull design, helm electronics, wake-shaping technology, and cockpit layout with the 2026 XT22 still being built today. For a pre-owned buyer, that's a meaningful advantage: factory parts support, factory service support, and aftermarket support are all current-era and readily available.
Power on this XT22 comes from a 6.0-liter V8 inboard engine — the larger-displacement powertrain option in the MasterCraft XT22 lineup. The 6.0L V8 (whether spec'd as Indmar Raptor 6.0L or comparable factory option) delivers more torque, more thrust at low RPM, and more authority pulling ballast-loaded surf weight than the standard 5.3L Ilmor alternative — particularly meaningful for a fully-ballasted surf-mode wakesurf wave. With 6.0L of displacement and the kind of horsepower-to-weight ratio that makes a fully-loaded XT22 feel agile rather than asthmatic, this build is the choice for buyers who prioritize low-RPM grunt and ballast-pulling authority over the standard small-block configuration. For exact engine make and model (Indmar Raptor 6.0L vs. another factory option) and current engine hour reading, please contact our Shell Knob team for the build specifics. Either way, this is a well-supported, well-engineered V8 inboard with broad parts and service availability through MasterCraft and the engine's manufacturer.
The XT22's wake-shaping system is full-featured factory SurfStar — MasterCraft's hydraulic wake-shaping technology that produces a clean, push-the-rope surf wave on either side of the boat at the flip of a switch from the helm. Combined with factory-plumbed ballast bags and the boat's factory ballast tanks, SurfStar enables the XT22 to throw a serious wakesurf wave on demand — the same modern surf-wave geometry MasterCraft delivers across the current XT and X-Series lineup. The XT Dash helm-electronics suite (current-generation MasterCraft helm electronics from this era) typically includes a touchscreen display with MyDrive control encoder, integrated radio controls, navigation, and the kind of helm-integration buyers expect from a current-vintage MasterCraft. MasterCraft SoundStage audio by Meridian — the factory premium audio package — typically includes Meridian in-cockpit speakers, Meridian subwoofers, Meridian DSP zone control, and a Meridian multi-channel amplifier. For specific audio configuration, dash specifics, and any owner-added tower accessories on this 2021 XT22, see the build specifics section below.
The color story on this XT22 is sporty, energetic, and unmistakably MasterCraft. Outside, the boat runs a White hull and gel coat base accented with Viper Red — MasterCraft's signature deep, saturated red that reads athletic and premium against the white base, exactly the kind of two-tone exterior that photographs well on the water and reads distinctively from across any cove. Where some MasterCrafts lean toward stealth-monochrome or sophisticated tonal grays, this White / Viper Red build is the more-energetic, more-youthful counterpart — high-contrast, high-visibility, and thoroughly sporting. Inside, the cockpit pairs Coolfeel Cloud Gray upholstery — MasterCraft's premium ventilated, breathable, marine-grade vinyl in a light, neutral cloud-gray tone — for an interior that's bright, comfortable in summer heat (Coolfeel stays meaningfully cooler than traditional vinyls under direct sun), and aesthetically grounded against the more-energetic exterior. For exact tower color, board-rack configuration, and any owner-added accessories on this specific build, see the build specifics section or contact our Shell Knob team for the in-person walkthrough.
Four model years is essentially nothing on a current-platform MasterCraft. The XT22 platform has been in continuous, incrementally-refined production since well before 2021, and remains in production today — meaning a 2021 build is fully-current architecture with full factory and dealer support. Compared to a brand-new 2026 XT22 build, this 2021 represents a meaningful pre-owned price savings while delivering the vast majority of the same underlying boat: same hull design, same SurfStar wake-shaping technology, same modern XT Dash helm electronics, same Meridian SoundStage audio architecture, and the same MasterCraft brand quality. Cosmetic and mechanical condition on a properly-stored four-year-old MasterCraft will typically present in clean, near-as-delivered condition. For specific engine hour reading, gel coat condition, upholstery condition, and any service history on this 2021 XT22, contact our Shell Knob team for a full review.
Because this 2021 MasterCraft XT22 is a pre-owned listing, the full original equipment list and any owner-added accessories are not reproduced in this online description. To get the complete and most accurate information about this specific boat — including current photos, exact engine make and model (Indmar Raptor 6.0L or other factory configuration), current engine hour reading, wakeboard tower configuration and tower-mounted accessories (board racks, tower speakers, tower bimini), specific SurfStar actuator and ballast configuration, exact Coolfeel cockpit upholstery condition, audio system specifics, helm electronics and gauges, ski-tow and watersports accessories, navigation equipment, current MasterCraft service history, and trailer condition — please contact our Shell Knob team directly. We're happy to walk through every detail, share additional photos and video, schedule a private showing, or arrange an on-water demo on Table Rock Lake.
American Water Sports is a Boating Industry Top 100 Dealer and an authorized MasterCraft dealer serving Table Rock Lake and the Ozarks from two convenient locations in Kimberling City and Shell Knob, Missouri. As a full-service MasterCraft dealer with factory-trained service technicians and direct parts and service access through MasterCraft's Vonore, Tennessee factory, we offer the kind of shop support and brand-correct expertise that makes MasterCraft ownership straightforward — whether the boat is new, pre-owned, brokered, or trade-in. We carry pre-owned MasterCrafts across multiple vintages and platforms — modern XT and NXT V-drives, X-Series builds, vintage X2 V-drives, and ProStar competition skiers — alongside our new-boat lineup and our broader pre-owned and brokered inventory across other premium brands. For the buyer looking at a near-current-vintage MasterCraft V-drive at a meaningful price savings vs. a current-model 2026 build, this 2021 XT22 in White / Viper Red with the 6.0L V8 and Coolfeel Cloud Gray interior is one of the cleanest pre-owned XT-class MasterCrafts on Table Rock Lake this season.
Ready to experience this pre-owned 2021 MasterCraft XT22 in person? Contact American Water Sports today to schedule a private showing, request additional photos or video, review the build specifics in detail, or arrange an on-water demo on Table Rock Lake.
Kimberling City: 13253 State Hwy 13, Kimberling City, MO 65686 — (417) 739-5912
Shell Knob: 26325 State Hwy 39, Shell Knob, MO 65747 — (417) 213-4999
Online: AmericanWaterSports.com
Pontoons
